User's Manual

62 PCI Express Solid-State Device Support
Physical Device Tasks
The physical device tasks for PCIe SSD are as follows:
•Blink and Unblink
• Full Initialization
Read Only Displays if the PCIe SSD is write-protected. Possible values
are: Yes and No.
Driver Version Displays the version of the driver that is currently installed on
the sub system.
NOTE: On some sub systems, Storage Management may not be
able to obtain the driver version. In this case, Storage
Management displays Not Applicable.
Device Life
Remaining
Displays the warranted wearout level of the PCIe SSD (in
percentage).
Failure Predicted Indicates whether the physical device has detected a condition
that may lead to a device failure.
Revision Displays the current running firmware version on the PCIe
SSD.
Model Number Displays the Piece Part Identification (PPID) of the PCIe
SSD.
Capacity Displays the full capacity of the device.
Vendor ID Displays the hardware vendor of the device.
Product ID Displays the product ID of the device.
Serial No. Displays the serial number of the device.
Negotiated Speed Displays the speed of data transfer that the device negotiated
during initial communication. The negated speed depends on
the speed of the device, the capable speed of the PCIe
extender card, and the current speed of the PCIe extender
card on that connector.
Capable Speed Displays the highest possible speed at which the device can
transfer data
Table 5-3. Physical Device Properties
Properties Description