User's Manual

58 Quick Access to Storage Status and Tasks
Related Information:
• Time Delay in Displaying Configuration Changes
Time Delay in Displaying Configuration Changes
When you change the storage configuration, Storage Management quickly
generates SNMP traps in response to the configuration changes. The Storage
Management MIB (Management Information Base) is also updated to reflect
storage configuration changes. However, it may take up to five minutes to
update the MIB with the most recent storage configuration. For this reason,
there is a time delay of up to five minutes between the receipt of an SNMP
trap and the ability to identify the configuration changes by querying the
Storage Management MIB. This time delay is particularly notable when
creating a new virtual disk or performing an unmirror or split mirror on a
RAID 1-concatenated virtual disk. You can minimize this time delay by
performing a controller rescan. For more information, see
Rescan Controller .