User's Manual

318 Supported Features
Enclosure Support
Enclosure and Backplane Features
This section identifies the features supported by the enclosure or backplane.
• Enclosure and Backplane Tasks
For information on controller-supported features, see:
• Supported Features on the PERC 5/ PERC 6/, and CERC 6/I Controllers
• Supported Features on the SAS 5/iR, SAS 6/iR, and PERC H200
Controllers
• Supported Features on the PERC H310 Adapter (A), PERC H310 Mini
Monolithic (MM), PERC H310 Mini Blades (MB) Controllers, see
Supported Features on the PERC Hardware Controllers
• Supported Features on the PERC H700, PERC H710 A, PERC H710 MB,
PERC H710 MM, PERC H710P A, PERC H710P MB, and PERC H710P
MM Controllers, see Supported Features on the PERC Hardware
Controllers
• Supported Features on the PERC H800 and PERC H810 A Controllers,
see Supported Features on the PERC Hardware Controllers
Restore Dead Disk Segments No No
Initialize Virtual Disk No No
Fast Initialize Virtual Disk No No
Slow Initialize Virtual Disk No No
Cancel Initialize Virtual Disk No No
Table A-40. Enclosure Support on the Non-RAID Controllers
Enclosure Support Non-RAID SCSI Non-RAID SAS
Can an enclosure be attached to this
controller?
Yes No
Table A-39. Virtual Disk Tasks Supported by the Non-RAID Controllers
(continued)
Virtual Disk Task Name Non-RAID SCSI Non-RAID SAS