User's Manual

246 Moving Physical and Virtual Disks from One System to Another
Migrating SAS Virtual Disks to Another System
The following describes how to migrate virtual disks and volumes from one
system to another.
1
Turn off the system that the physical disks are being moved from.
2 If the receiving controller does not have a preexisting virtual disk
configuration, then turn off its server.
3 Place the physical disks into the new enclosure.
4 Start up the system connected to the receiving controller.
5 Use the Foreign Configuration Operations task to import the migrated
virtual disks on the receiving controller.
NOTE: The Foreign Configuration Operations are not supported on PERC
S100, S110, and S300 controllers.
The migration is complete. The virtual disk is now manageable through
Storage Management.