User's Manual

Virtual Disks 211
Table 13-3. Virtual Disk Properties
Property Definition
Status These icons represent the severity or health of the storage
component.
Normal/OK
Warning/Non-critical
Critical/Fatal
For more information, see
Storage Component Severity .
Name This property displays the virtual disk name.
State This property displays the current status of the virtual disk.
Possible values are:
Ready—The virtual disk is functioning normally.
Degraded—A physical disk in a redundant virtual disk is not
online.
Resynching—A consistency check is being performed on the
virtual disk.
Performing a
Cancel Check Consistency on a virtual disk while
it is in Resynching state causes the virtual disk to be in a
Failed Redundancy state.
Resynching Paused—A consistency check has been paused on
the virtual disk.
Regenerating—A physical disk in the virtual disk is rebuilding.
Reconstructing—The virtual disk configuration has changed.
The physical disks included in the virtual disk are being
modified to support the new configuration.
Failed—The virtual disk has encountered a failure of one or
more components and is no longer functioning.