User's Manual

Connectors 163
4 Click Continue .
RAID 50
1
Select one physical disk on each of three channels. (In other words, each of
the three channels select a single disk.)
2 Select an additional disk on each of the three channels. You have now
selected the minimum number of disks for a RAID 50. Continue selecting
a disk on each channel until you have selected the desired number of disks.
3 Repeat step 2 until you have the desired number of disks.
4 Click Continue .
Connector Health
This screen displays the status of the connector and the components attached
to the connector.
Connector Status
Component status is indicated by the severity. A component with a Warning
or Critical/Failure status requires immediate attention to avoid data loss if
possible. A component’s status may indicate the combined status of the
component and its lower-level objects. For more information, see
Determining the Health Status for Storage Components .
It may be useful to review the Alert Log for events indicating why a
component has a Warning or Critical status. For additional troubleshooting
information, see
Tro ub les ho ot in g .