User's Manual

128 Controllers
2 In the CacheCade Group section, select SATA SSD or SAS SSD if your
system contains both SAS and SATA SSDs.
3 Enter a name for the CacheCade. The size is calculated as follows:
CacheCade size = capacity of the smallest SSD * the number of SSDs
4 From the available free disks that are displayed, select the SSDs that you
would like to include in the CacheCade. The selected disks are displayed
in the
Physical Disks Selected section.
5 Click Finish .
NOTE: The procedure of selecting physical disks while creating a CacheCade is
similar to the selection of disks while creating a virtual disk. For more information,
see
Click Exit Wizard to cancel the virtual disk creation. .
Resizing the CacheCade
To resize the CacheCade:
1
In the CacheCade(s) screen, navigate to the CacheCade that you want to
resize and select
Resize ... from the Ta sk s drop-down menu.
The
Resize CacheCade(s) screen is displayed.
2 From the available CacheCade(s), add or remove additional
CacheCade(s) as required. The disks that you select are displayed in the
Selected Physical Disks section.
NOTE: While selecting and deselecting the SSDs that must participate in the
CacheCade, you must retain at least one of the original SSDs.
3 Click Finish .
Renaming the CacheCade
1 In the CacheCade(s) screen, go to the CacheCade that you want to
rename and select
Rename ... from the available Ta sk s .
2 In the Rename screen, enter the new name for the CacheCade and click
Finish .
Blinking and Unblinking the CacheCade
In the CacheCade(s) screen, go to the CacheCade that you want to blink and
select
Blink... from the available Ta sk s .