User's Manual

106 Controllers
Failure Predicted This property displays whether or not the physical disk has
received a Self-Monitoring Analysis and Reporting Technology
(SMART) alert and is therefore predicted to fail. For more
information on SMART predictive failure analysis, see
Monitoring Disk Reliability on RAID Controllers . For
information on replacing the physical disk, see Replacing a
Physical Disk Receiving SMART Alerts
.
You may also want to review the Alert Log to see whether the
physical disk has generated alerts pertaining to a SMART
predictive failure. These alerts can assist you in identifying the
cause of the SMART alert. The following alerts may be
generated in response to a SMART alert:
2094
2106
2107
2108
2109
2110
2111
For information on Alert Messages, see the Server
Administrator Messages Reference Guide.
Progress This property displays the progress of an operation being
performed on the physical disk.
This property is only displayed when an operation is being
performed on the physical disk.
Bus Protocol This property displays the technology that the physical disk is
using. Possible values are:
SCSI—Small Computer System Interface
SAS—Serial Attached SCSI
SATA—Serial Advanced Technology Attachment (SATA)
Certified This property indicates that the drive has firmware which has
been tested and fully qualified by the service provider. Drives
that are not certified by the service provider may work but, are
not supported and recommended for use in servers.
Property Definition