SNMP Reference Guide

Access Read-only
Table 1814. Tape Drive Bus Type
Name
tapeDriveBusType
Object ID 1.3.6.1.4.1.674.10893.1.20.130.17.1.6
Description The bus type of the tape drive.
Possible values: 8. SAS
Syntax INTEGER
Access Read-only
Table 1815. Tape Drive SAS Address
Name
tapeDriveSASAddress
Object ID 1.3.6.1.4.1.674.10893.1.20.130.17.1.7
Description The specified SAS address if this is a SAS tape drive.
Syntax DisplayString
Access Read-only
Table 1816. Tape Drive Media Type
Name
tapeDriveMediaType
Object ID 1.3.6.1.4.1.674.10893.1.20.130.17.1.8
Description The Media type of the tape drive.
Possible Values: 4: Tape
Syntax INTEGER
Access Read-only
Logical Devices Group
The Logical Devices Management Information Base (MIB) group provides information about the logical devices
managed by the Dell Storage Management Software and their relationships to each other.
This group and all of its associated tables and objects are not supported on Microsoft Windows Advanced Server
Limited Edition 64-bit operating system (Windows.Net-64) on a Dell PowerEdge 7150. The following MIB tables define
objects and relationships, or connections among the objects, in the Logical Devices Group:
• Virtual Disk Table — describes available properties for each virtual disk on the managed system.
• Array Disk Logical Connection Table — describes the connections between array disks, the virtual disk to which
they belong, and their associated logical disk. For each object in the table, its object number corresponds to an
instance number in the appropriate MIB table for that object where all of the object properties can be found.
This table describes available properties for each virtual disk on the managed system.
The following object sets up the Virtual Disk Table.
490