SNMP Reference Guide

Access Read-only
Table 1805. Battery Connection Controller Name
Name
batteryConnectionControllerName
Object ID 1.3.6.1.4.1.674.10893.1.20.130.16.1.4
Description Identifies the name of the controller as represented in Storage Management to
which this battery belongs.
Syntax DisplayString
Access Read-only
Table 1806. Battery Connection Controller Number
Name
batteryConnectionControllerNumber
Object ID 1.3.6.1.4.1.674.10893.1.20.130.16.1.5
Description Identifies instance number of the controller in the controllerTable to which this
battery belongs.
Syntax Integer
Access Read-only
Tape Drive Table
This table describes available properties for each tape drive on the managed system.
The following object sets up the Tape Drive Table.
Table 1807. Tape Drive Table
Name
tapeDriveTable
Object ID 1.3.6.1.4.1.674.10893.1.20.130.17
Description
A table of listed Tape Drives The number of entries is related to number of Tape
Drives discovered in the system. The maximum number of entries is
implementation dependent.
NOTE: The properties in this table may not be applicable to all entries.
Syntax SEQUENCE OF TapeDriveEntry
Access Not accessible
Table 1808. Tape Drive Entry
Name
tapeDriveEntry
Object ID 1.3.6.1.4.1.674.10893.1.20.130.17.1
Description An entry in the Tape Library table. A row in this table cannot be created or deleted
by SNMP operations on columns of the table.
Syntax TapeDriveEntry
488