SNMP Reference Guide

Access Read-only
Table 1584. Channel Severity
Name
channelSeverity
Object ID 1.3.6.1.4.1.674.10893.1.20.130.2.1.4
Description This entry is obsolete for Storage Management. It was replaced with RollUpStatus
and ComponentStatus for each device.
Syntax Integer
Access Read-only
Table 1585. Channel Termination
Name
channelTermination
Object ID 1.3.6.1.4.1.674.10893.1.20.130.2.1.5
Description Identifies the type of SCSI termination on this channel. Termination is required for
proper operation of this channel.
Possible values:
1: Wide Termination (16 bit)
2: Narrow Termination (8 bit)
3: Not Terminated
Syntax Integer
Access Read-only
Table 1586. Channel SCSI ID
Name
channelSCSIID
Object ID 1.3.6.1.4.1.674.10893.1.20.130.2.1.6
Description Identifies the SCSI ID of the controller to which the channel belongs.
Syntax Integer
Access Read-only
Table 1587. Channel Roll-Up Status
Name
channelRollUpStatus
Object ID 1.3.6.1.4.1.674.10893.1.20.130.2.1.7
Description Identifies the severity of the channel state. This is the combined status of the
channel and its components.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
437