SNMP Reference Guide

Dell Remote Access Controller Out-of-Band MIB

The Dell Remote Access Controller Out-of-Band MIB (filename dellRAC.mib) provides management data that allows you

to monitor the Chassis Management Controller. This MIB also contains information on RAC legacy alerting. The

following table describes each Dell RAC Out-of-Band group and lists the MIB group number assigned to the MIB group.

See the relevant section for more information about the MIB objects defined in a MIB group.

Table 6. Dell RAC Out-of-Band MIB

Section Topics MIB Group Number

25 The Dell RAC Out-of-Band MIB consists of information for the

following groups:

• Product Information

• Chassis Status

• Chassis Power

• CMC Power Information

• CMC PSU Information

• Chassis Alerts

• Legacy Alerting

How This Guide Defines Technical Terms

The following table provides information about where to find definitions for technical terms in this reference guide.

Table 7. Where to Find Definitions for Technical Terms

Type of Definition See

Basic SNMP vocabulary. Introduction

MIB-group-specific variable values. MIB-group-specific MIB variables

contain links to the tables that define these values in the last section of the

section in which these variables are used.

Sections 3, 5, 7, 8, 9, and 11 through 18.

Systems management terms, acronyms, and commonly managed

components referred to in this reference guide.

Glossary

available on the Dell Support

web site at dell.com/support/manuals.

Server Administrator-standard data types that specify variable values in this

reference guide.

Appendix A, Standard Data Type

Definitions.

Basic Terminology

It is important to have a good understanding of the key technical terms used in this guide. This guide provides definitions

for all essential terms used in describing the Server Administrator MIBs. For definitions on all essential terms and

acronyms, see the

Glossary

available on the Dell Support website at dell.com/support/manuals.

Frequently Used Terms in Variable Names

The following terms are frequently used in the name of a MIB variable:

Capability refers to the actions an object can perform, or to actions that can be taken by the object. Hot-pluggable is an

example of a capability. If a card is hot-pluggable, it can be replaced while a system is running. Capability settings refer