Manualshelf

Reference Guide

ManualsBrandsDell ManualsSoftwareOpenManage Server Administrator Version 7.2
21222324252627282930
Parameter Description
Parallel port address Displays whether the address is located on LPT1, LPT2, and LPT3, or if it is disabled.
Parallel port mode Displays the setting associated with the parallel port.
Primary SCSI Displays whether the device is on or off.
RAID on motherboard Displays whether RAID-on-motherboard is detected as a RAID device, a SCSI device,
or if the device is disabled during system boot.
RAID Channel A Displays whether RAID-on-motherboard Channel A is detected as a RAID device or a
SCSI device.
RAID Channel B Displays whether RAID-on-motherboard Channel B is detected as a RAID device or a
SCSI device.
Serial Port 1 Displays whether serial port 1 is mapped to a COM port, COM port 1, COM port 3,
COM1 BMC, BMC Serial, BMC NIC, BMC RAC, or is disabled.
Serial Port 2 Displays whether serial port 2 is mapped to a COM port, COM port 2, COM port 4, or is
disabled.
Speaker Displays whether the speaker is on or off.
USB or USBB Displays whether the USB port is enabled or disabled.
Secondary SCSI Displays whether the device is enabled or disabled.
Serial Communications Displays whether COM port 1 and COM port 2 are off or on with or without console
redirection.
Console Redirection After Boot Displays whether console redirection after system reboot is enabled or disabled.
External Serial Connector Displays whether the external serial connector is mapped to Serial Device 1, Serial
Device 2, or a Remote Access Device.
Console Redirection Failsafe
Baud Rate
Displays the setting for console redirection failsafe baud rate.
Serial Address Select Displays port address for the serial devices.
BIOS-Setup-Gruppen auf PowerEdge yx2x-Systemen
Die folgende Tabelle zeigt die verfügbaren Gruppen der BIOS-Setup-Parameter an PowerEdge
yx2x
-Systemen an.
ANMERKUNG: Je nach Hardware-Konfiguration können ggf. Attribute in einer bestimmten Gruppe unterschiedlich
sein.
Tabelle 6. BIOS-Setup-Gruppen auf PowerEdge yx2x-Systemen
Gruppe Beschreibung
BIOS Boot Settings (BIOS-
Starteinstellungen)
Steuert die Systemstarteinstellungen, wenn bootmode auf bios eingestellt ist.
Boot Settings (Starteinstellungen) Steuert die Systemstarteinstellungen, wenn bootmode auf bios eingestellt ist.
Integrierte Serververwaltung Stellt die integrierten Serververwaltungsoptionen ein.
Integrierte Geräte Steuert die auf der Systemplatine integrierten Geräte.
29