Manualshelf

Reference Guide

ManualsBrandsDell ManualsSoftwareOpenManage Server Administrator Version 7.2
21222324252627282930
Parameter Description
NIC 1 Displays whether the first NIC is enabled (with or without PXE/iSCSI) or disabled
during system boot.
NIC 2 Displays whether the second NIC is enabled (with or without PXE/iSCSI) or disabled
during system boot.
NIC 3 Displays whether the third NIC is enabled (with or without PXE/iSCSI) or disabled
during system boot.
NIC 4 Displays whether the fourth NIC is enabled (with or without PXE/iSCSI) or disabled
during system boot.
Trusted Cryptographic Module
(TCM)
Displays whether TCM is on or off.
Trusted Platform Module
(TPM) Security
Displays whether TPM is off, on with pre-boot measurements, or on without pre-boot
measurements.
Internal USB Port (number) Displays whether the internal USB is enabled or disabled.
NOTE: Server Administrator may not display the USB sequence number if there is
only one USB port on the system.
Operating System Watchdog
Timer
Displays whether the operating system watchdog timer is enabled or disabled.
HT Assist Displays the status of the probe filter chipset option.
Internal SD Card Displays whether the internal SD card is enabled or disabled.
Bezel Displays whether the bezel removal intrusion check during system reboot is enabled
or disabled.
Console Redirection Displays whether the BIOS screen is redirected over a particular serial port or if it is
turned off.
Diskette Displays whether the diskette is disabled, auto enabled, or read-only.
Demand Based Power
Management (DBS)
Displays whether DBS is enabled or disabled on the system.
Embedded Hypervisor Displays whether the embedded hypervisor is enabled or disabled.
IDE Displays whether the drive is enabled or disabled.
IDE Primary Drive 0 Displays whether the device is automatically detected and enabled or if the device is
disabled.
IDE Primary Drive 1 Displays whether the device is automatically detected and enabled or if the device is
disabled.
Intrusion Displays whether the intrusion check is enabled or disabled during system boot.
Mouse Displays whether the mouse is enabled or disabled.
Optical Drive Controller Displays whether the optical drive controller is enabled or disabled.
Parallel port address Displays whether the address is located on LPT1, LPT2, and LPT3, or if it is disabled.
Parallel port mode Displays the setting associated with the parallel port.
28