Reference Guide

Table 32. Usage Of extipmiusergroup=custom

name=value pair 1 name=value pair 2 name=value pair 3 Description

config=user

id=user id

extipmiusergroup=custom

NOTE:

extipmiusergroup user

group is available only

on the Dell

yx0x

blade

systems.

loginidrac=true | false true or false: Enables or

disables logging into iDRAC.

configureidrac=true | false true or false: Enables or

disables configuration of

iDRAC.

Omconfig Chassis Temps Or Omconfig Mainsystem Temps

Use the omconfig chassis temps or omconfig mainsystem temps command to set warning thresholds for temperature

probes. As with other components, you can view both warning and failure threshold values, but you cannot set failure

threshold values. The system manufacturer sets the minimum and maximum failure threshold values.

NOTE: Threshold values that you can set vary from one system configuration to another.

Valid Parameters For Temperature Warning Thresholds

The following table displays the valid parameters for setting temperature warning thresholds:

Table 33. Valid Parameters For Omconfig Chassis Temps Or Omconfig Mainsystem Temps

name=value pair Description

index=<

> Number of the probe or probe index (specify).

warnthresh=default Sets the minimum and maximum warning threshold values to default.

minwarnthresh=<

> Sets the minimum warning threshold values (one decimal place).

maxwarnthresh=<

> Sets the maximum warning threshold values (one decimal place).

Setting Minimum And Maximum Warning Threshold Values

To set both the upper and lower temperature warning threshold values to the recommended default value, type:

omconfig chassis temps index=0 warnthresh=default

omconfig mainsystem temps index=0 warnthresh=default

You cannot default one value and set another. In other words, if you set the minimum warning threshold value to the

default value, you are also selecting the default value for the maximum warning threshold value.

NOTE: The capabilities for managing sensors vary by systems.

Specify A Value For Minimum And Maximum Warning Thresholds

To specify values for the temperature probe warning thresholds, you must specify the number of the probe you are

configuring and the minimum and/or maximum warning threshold value. In the following example, the probe that is being

configured is probe 4:

omconfig chassis temps index=4 minwarnthresh=11.2 maxwarnthresh=58.7