Reference Guide

name=value pair 1
config=
name=value pair 2 Description
dracnic: Enables DRAC NIC if DRAC 5 is installed.
NOTE: The nicselection option is supported only
on PowerEdge x9xx to yx1x systems. From
PowerEdge yx2x systems onwards, primarynw and
failovernw replaces nicselection.
primarynw=dedicated | lom1 | lom2 |
lom3 | lom4
dedicated: Configures dedicated port as primary
network for remote access.
NOTE: This option requires license to configure
primarynw as dedicated. If the appropriate license
is not installed or has expired, the system displays
an error message. For more information, see Dell
License Manager at dell.com/support/manuals.
lom 1: Configures lom1 port as the primary network for
remote access.
lom 2: Configures lom2 port as the primary network for
remote access.
lom 3: Configures lom3 port as the primary network for
remote access.
lom 4: Configures lom4 port as the primary network for
remote access.
NOTE: The primarynw option is supported from
PowerEdge yx2x systems onward. If the
primarynw is set to dedicated, then set failovernw
to none.
failovernw=none | lom1 | lom2 | lom3 |
lom4 | all
none: Configures the failover network to none.
lom 1:Configures the failover network to lom 1.
lom 2: Configures the failover network to lom 2.
lom 3: Configures the failover network to lom 3.
lom 4: Configures the failover network to lom 4.
all: Configures the failover network to all loms.
NOTE: The failovernw option is supported on
PowerEdge yx2x systems onward. Configure both
primarynw and failovernw to set the nicselection.
The primarynw and failovernw options cannot
have the same value.
NOTE: Failovernw requires license to configure
the ports. If the appropriate license is not installed
or has expired, the system displays an error
message. For more information, see Dell License
Manager at dell.com/support/manuals.
ipaddress=IP
Sets the IP address if you have selected static as the
IP address source for the BMC LAN interface.
subnet=Subnet Sets a subnet mask if you have selected static as the
IP address source for the BMC LAN interface.
gateway=Gateway
Sets a gateway address if you have selected static as
the IP address source for the BMC LAN interface.
89