Read me

Issue 4: After a "Reset to Defaults" operation of the Integrated Dell Remote Access Controller, the first user
configuration operation fails if it is a single-user configuration item (such as enabling or disabling a user or
changing user name). Always change a combination of two-user configuration items (such as enabling or
disabling a user and changing user name) concurrently during your first configuration operation.
Issue 5: The "Format or Split Mirror" operation may fail on a RAID 1 virtual disk on a CERC SATA 1.5/6ch
controller.
Issue 6: While typing the command "omreport system version -outc <filename>", ensure that you specify
an absolute path name for the output file, else, the output file is empty. For example, c:\out.txt.
Issue 7: Typing "omreport system esmlog/alertlog/cmdlog -fmt tbl" command on the CLI can result in XML
parsing errors if the size of the log is very large.
Use the GUI or the "omreport system esmlog/alertlog/cmdlog" CLI command to view the contents of the
log.
Issue 8: For complex "omconfig" CLI commands that contain multiple set commands in one command line,
the CLI may report a success status for the command even if a part of the command failed. To avoid this
issue, run only one command per command line. The current settings can be confirmed by performing the
corresponding "omreport" command.
Issue 9: Some complex "omconfig" CLI commands that contain multiple set operations have been modified
to avoid the above problem. While executing a CLI command if the message, "Error! Illegal combination of
parameters" is displayed, modify your command into several simpler commands. Each command should
change only one setting.
Issue 10: When running Server Administrator on a system with a traditional Chinese operating system, the
application pages are displayed in simplified Chinese. To view the Server Administrator pages in English, go
to your browser language preference page and change the language to English.
Issue 11: Log files saved from Server Administrator are saved in zip format. It is recommended that you
open this zip file using WinZip. Windows Server 2003 or Windows XP embedded "Compressed (zipped)
Folder" utility is not recommended.
Issue 12: After configuring BIOS settings on certain systems, a second reboot may be required for the
Server Administrator to display the updated BIOS settings properly.
Issue 13: If you import an invalid root certificate into Server Administrator, using "Preferences-> General
Settings-> Web Server-> X.509 Certificate", and try to log on to the application after restarting the Web
server, a blank page is displayed.
To fix this issue, restore your original "keystore.db" file before importing a valid root certificate. To restore
the "keystore.db" file, use both the basic operating system commands and the Server Administrator
Command Line Instrumentation (CLI).
Perform the following steps from your operating system command line:
1. Type: