Read me

Workaround: To enable editing of the Server Administrator BIOS attributes, launch Lifecycle Controller
while booting.
Issue 37: DF552204: On Mozilla Firefox browsers (versions 10, 11 and 12), Server Administrator fails to
launch if IPv6 address is used.
This is a known issue. For more information, see https://bugzilla.mozilla.org/show_bug.cgi?id=633001
Issue 38 (BITS040169): In case of Boot/HDD/UEFI sequence, if they are read-only, then toggle buttons (+
and -) and submit button are not visible.
On BIOS setup page, dependencies may exist between the various attributes for Bios settings. Setting an
attribute value may change the state of the dependent attributes to non-editable or editable. For example,
changing the Boot Mode to UEFI from the Boot Settings page does not allow you to configure the Boot or
Hard-Disk Drive Sequence in the BIOS Boot Settings page.
When the page is non-editable, the toggle buttons on the page allows toggling the order of the boot
sequence. However, settings cannot be configured since “Apply" button will not available to submit the
settings.
Issue 39 (BITS040169): On 11G and 12G systems running the Linux OS, the omreport system summary
command displays “RAC Command Interface” as 7.1.0. “RAC Command Interface” is a DRAC4 RPM and its
version is 7.1. It is installed as a dependent package for iDRAC6 and iDRAC7 Command Interface packages.
Issues for Server Administrator Running on All Microsoft Windows
Operating Systems
Issue 1: Execute all Server Administrator CLI commands from a 32-bit Windows command prompt. You can
access the 32-bit command prompt by clicking "Start-> Programs-> Accessories-> Command Prompt" or by
clicking "Start-> Run" and then typing "cmd.exe". Attempts to run the CLI commands from the DOS
command "command.com" may generate unpredictable results.
Issue 2: The DSM Server Administrator Connection Service may hang on system startup if both Oracle and
VERITAS Backup Exec are installed on the system. To manually start the DSM Server Administrator
Connection Service on a system running Windows, click "Start-> Programs-> Administrative Tools-> Service",
right-click "DSM Server Administrator Connections Services" and select "Start".
Issue 3: You may not have appropriate privileges on the Server Administrator GUI if:
• You belong to an Active Directory group that is part of another group.
• You try to launch Server Administrator using the desktop icon when single sign-on is enabled.
Issue 4 DF551365: Server Administrator does not display the IP Address for Network Adapters that are used
for virtual machines
Description: In a Microsoft Hyper-V environment, the Server Administrator Network page may indicate
network adapters that are connected to a network and display Ethernet statistics but, the IP address is
displayed as 'Unknown'. This is because Hyper-V virtualizes adapters that are bonded to its virtual switch.