Read me

On Server Administrator, under Asset Information-> System Information-> Primary User Telephone
Number configuration allows only alphanumeric characters.
Issue 30: The selection of default option for front panel LCD in Server Administrator displays the Model
Name whereas the default is Service Tag on the physical LCD.
Issue 31: In case Server Administrator does not respond or is locked to your selections on the component
tree, perform the following steps:
1. Click “Preferences”. The Preferences page appears.
2. Click “Server Administrator”. The items on the front page may respond to your click.
Issue 32: DF277439: Persistence of Configuration and Log File Changes in VMware ESXi.
On systems running the VMware ESXi operating system, the file system is ram disk. Modifications made to
the files within the file system are generally not persistent across reboots, with the exception of designated
configuration and log files. These files are updated to the disk periodically and on system shutdown. If the
system is reset without a graceful shutdown before the updates to the designated configuration are made
and before log files are updated to the disk, the changes are lost.
The following is an example of the effect of this behavior:
On certain systems, the first time that the thresholds for a probe are changed after Server Administrator is
installed; the current threshold values for that probe are saved as the default threshold values by writing
the values to a configuration file. When "Set to Default" is performed after the first change of the
thresholds, Server Administrator sets the threshold values to the values that were saved in the
configuration file as the default. If the system running the VMware ESXi operating system is reset without a
graceful shutdown before the changes to the configuration file are updated to the disk, the user-defined
thresholds become the default thresholds.
Issue 33: DF315853: Some Server Administrator CLI commands function properly only when run from the
elevated console window.
It is recommended that you use the elevated console for running the CLI.
Issue 34: Due to some limitations, you cannot log on simultaneously to multiple browser instances/tabs
using SSO login, as only one session remains active while the other sessions expire.
Issue 35: DF489034: Intel TXT configuration fails due to Virtualization technology dependency.
If the current Virtualization Technology attribute setting is "Disabled" (Virtualization Technology is part of
the Processor Settings group on the BIOS setup page); the Intel TXT attribute configuration fails on the
Server Administrator user interface (System -> Main System Chassis -> BIOS -> Setup ->System Security.) To
resolve this issue, configure Virtualization technology setting to "Enabled" and reconfigure the Intel TXT
attribute, if it is configurable.
Issue 36: DF549057: When an operating system is installed through USC, the BIOS attributes in Server
Administrator are displayed as read-only. You can edit the BIOS attributes 18 hours after the operating
system installation.