Dell OpenManage Server Administrator Version 7.
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2012 Dell Inc.
Contents Notes, Cautions, and Warnings...................................................................................................2 1 Introduction..................................................................................................................................7 Server Administrator................................................................................................................................................7 Whats New in This Release....................................
CIM_CurrentSensor................................................................................................................................................36 CIM_VoltageSensor................................................................................................................................................37 CIM_Tachometer....................................................................................................................................................37 CIM_WatchDog.......
DELL_CMInventory.................................................................................................................................................71 DELL_CMOS............................................................................................................................................................72 DELL_CMProductInfo.............................................................................................................................................
Introduction 1 This reference guide documents the Dell OpenManage Server Administrator Common Information Model (CIM) provider contained in the Management Object File (MOF) dccim32.mof. CIM provides a conceptual model for describing manageable objects in a systems management environment. CIM is a modeling tool rather than a programming language. CIM provides the structure for organizing objects into a model of a managed environment.
• CIM_Dependency: Antecedent, Dependent • CIM_SoftwareElement: Name, Version, SoftwareElementState, SoftwareElementID, TargetOperatingSystem • CIM_SoftwareFeature: IdentifyingNumber, ProductName, Vendor, Version, Name • CIM_IRQ: CSCreationClassName, CSName, CreationClassName, IRQNumber • CIM_MemoryMappedIO: CSCreationClassName, CSName, CreationClassName, StartingAddress • CIM_DMA: CSCreationClassName, CSName, CreationClassName, DMAChannel • CIM_RedundancyGroup: CreationClassName, Name • DELL_
Classes That Describe Relationships Classes that derive from CIM_Dependency have CIM_Dependency as their parent class, but they are documented in terms of antecedent and dependent elements in a relationship rather than in terms of common properties.
Property Description Data Type LowerThresholdCritical If the current reading is between upper threshold critical and upper threshold fatal, the current state is critical. See Figure 3‑2. sint32 IsLinear Indicates that the sensor is linear over Boolean its dynamic range. Manufacturer Provides the name of the organization string responsible for producing the CIM_PhysicalElement or CIM_SoftwareElement. This may be the entity from whom the element is purchased, but not necessarily.
Property Description Data Type the sensor, unless explicitly overridden by the units’ qualifier. UpperThresholdCritical If the current reading is between upper threshold critical and upper threshold fatal, the current status is critical. See Figure 3‑2. sint32 UpperThresholdNonCritical If the current reading is between sint32 lower threshold noncritical and lower threshold critical, the current status is noncritical. See Figure 3‑2. Version Version should be in the form ..
Data Type stipulates the format that the values of this property must take. Common data types include Boolean, string, and various types of integer. Boolean indicates that the property must be expressed as one of two alternatives.
2 CIM_Physical Element CIM_PhysicalElement is a CIM-defined class. The CIM_PhysicalElement class contains the subclasses shown in Figure CIM_PhysicalElement Class Structure CIM_PhysicalElement Subclasses of the CIM_PhysicalElement class listed in Table below define any component of a system that has a distinct physical identity. Physical elements are tangible managed system elements (usually actual hardware items) that have a physical manifestation of some sort.
SerialNumber A manufacturer-allocated number used to identify the physical element. string Tag string Uniquely identifies the physical element and serves as the element’s key. The Tag property can contain information such as asset tag or serial number data. The key for a physical element is placed very high in the object hierarchy in order to identify the hardware/entity independently, regardless of the physical placement in or on cabinets, adapters, and so on.
normally found without impairing the function of the overall package. Replaceable A CIM_PhysicalPackage is replaceable Boolean if it is possible to substitute a physically different element for the original element, as in a field replaceable unit (FRU). For example, some computer systems allow the microprocessor to be upgraded to one of a higher clock rating. In this case, the microprocessor is said to be replaceable.
CIM_Chassis The CIM_Chassis class described in Table below represents the physical elements that enclose physical elements such as power supplies, fans, and processors. Table 5. CIM_Chassis Parent Properties Class Name: CIM_Chassis Parent Class:CIM_PhysicalFrame Property Description ChassisTypes Values for the ChassisTypes uint16 property are: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.
The DELL_Chassis class explained in Table below defines the identifying and status properties of the chassis. DELL_Chassis inherits from CIM-defined classes, but is populated by Dell properties. Table 6. DELL_Chassis Properties Class Name: DELL_Chassis Parent Class: CIM_Chassis Property Description Data Type AssetTag Indicates the container AssetTag string. This asset tag string is assigned by the system administrator.
Class Name: DELL_Chassis Parent Class: CIM_Chassis Property Description ChassisSystemProperties Indicates chassis characteristics, such uint16 as energy smart and so on. ChassisSystemRevision Indicates the chassis revision. uint16 EsmLogStatus Indicates the global status of ESM log. string MemoryRedStatus Indicates the global status of memory redundancy. string ChassisExpressServiceCode Indicates the chassis express service code.
3 — DIP 4 — ZIP 5 — SOJ 6 — Proprietary 7 — SIMM 8 — DIMM 9 — TSOP 10 — PGA 11 — RIMM 12 — SODIMM 13 — SRIMM 14 — SMD 15 — SSMP 16 — QFP 17 — TQFP 18 — SOIC 19 — LCC 20 — PLCC 21 — BGA 22 — FPBGA 23 — LGA 24 — FB-DIMM CIM_PhysicalMemory The CIM_PhysicalMemory class listed in PhysicalMemoryProperties is a subclass of CIM_Chip, representing low-level memory devices, such as SIMMs, DIMMs, and so on. Table 9.
3 - Synchronous DRAM 4 - Cache DRAM 5 - EDO 6 - EDRAM 7 - VRAM 8 - SRAM 9 - RAM 10 - ROM 11 — Flash 12 - EEPROM 13 - FEPROM 14 - EPROM 15 - CDRAM 16 - 3DRAM 17 - SDRAM 18 - SGRAM 19 - RDRAM 20 - DDR 21 - DDR2 22 - DDR2 FB-DIMM 24 - DDR3 25 - FBD2 TotalWidth Indicates the total width, in uint16 bits, of the physical memory, including check or error correction bits. If there are no error correction bits, the value in this property should match that specified for the DataWidth property.
16 - Hexa SpeedAsString Indicates the accurate speed of the physical memory, in string format (with units). string Capacity Indicates the total capacity of this physical memory, in bytes. uint64 BankLabel A string identifying the physically labeled bank where the memory is located, for example, "Bank 0" or "Bank A." string PositionInRow Specifies the position of the uint32 physical memory in a “row.
ConnectorPinout A free-form string describing the pin configuration and signal usage of a physical connector. string ConnectorType uint16 An array of integers defining the type of physical connector. An array is specified to allow the description of “combinations” of connector information. For example, one array entry could specify RS-232, another DB-25, and a third entry could define the connector as male. See Connector Type Values for the values of the ConnectorType property. Table 11.
15 - Fibre Channel BNC 45 - unused 75 - VME64 105 - NGIO 16 - ATA 3-1/2 inch (40 pins) 46 - VESA 76 - Proprietary 106 - PMC 17 - ATA 2-1/2 inch (44 pins) 47 - unused 77 - Proprietary processor card slot 107 - MTRJ 18 - ATA-2 48 - unused 78 - Proprietary memory card slot 108 - VF-45 19 - ATA-3 49 - unused 79 - Proprietary I/O riser slot 109 - Future I/O 20 - ATA/66 50 - unused 80 - PCI-66 MHz 110 - SC 21 - DB-9 51 - unused 81 - AGP2X 111 - SG 22 - DB-15 52 - unused 82 - AGP4X 112
into this slot. Values for the MaxDataWidth property are as follows: 0 - Unknown 1 - Other 8 - bits 16 - bits 32 - bits 64 - bits 128 - bits SystemSlotType 24 Indicates the type of system slot.
173 - PCI Express Gen 2 x2 174 - PCI Express Gen 2 x4 175 - PCI Express Gen 2 x8 176 - PCI Express Gen 2 x16 25
CIM_LogicalElement 3 CIM_LogicalElement is a CIM-defined class containing the subclasses described in below Figure .
CIM_LogicalElement Table properties lists the following characteristics for members of the CIM_LogicalElement class: • Represent abstractions used to manage and coordinate aspects of a physical environment such as files, processes, systems, system capabilities, and network components in the form of logical devices • Represent devices, where devices are abstractions of hardware entities that may or may not be realized in physical hardware Table 13.
PrimaryOwnerName Indicates the name of the primary system owner. string Roles An array of strings that string specifies the roles this system plays in the IT environment. For example, for an instance of a network system, the Roles property might contain the string "storage system.
CIM_LogicalDevice The CIM_LogicalDevice class described below Table models a hardware entity that may be realized in physical hardware. CIM_LogicalDevice includes any characteristics of a logical device that manages its operation or configuration. An example of a logical device is a temperature sensor’s reading of the actual temperature. Table 17.
Property Description Data Type FRUInformationState Indicates the state and availability of FRU information. uint 16 FRUDeviceName Indicates the device name of the FRU. string FRUManufacturingDateNam Indicates the manufacturing datetime e date of the FRU in ticks. FRUManufacturerName Indicates the name of the manufacturer. string FRUPartNumberName Indicates the FRU part number. string FRUSerialNumberName Indicates the FRU serial number.
4 - Current sensors measure current readings. 5 - Tachometers measure speed/revolutions of a device. For example, a fan device can have an associated tachometer that measures its speed. 6 - Batteries maintain the time and date and save the system’s BIOS configuration when the system is turned off. OtherSensorType Description Indicates the type of sensor when the SensorType property is set to Other. string PossibleStates Enumerates the string outputs of the sensor.
CurrentReading See Common Properties of Classes sint32 PossibleValues Enumerates the string outputs that can be reported by the sensor. sint32 CIM_NumericSensor The CIM_NumericSensor class described in NumericSensor Properties returns numeric settings and may also support threshold settings. Figure below shows the relationship among upper and lower critical and upper and lower non-critical threshold values. The normal range falls between upper and lower non-critical thresholds.
Table 21.
IsLinear See Common Properties of Classes Boolean LowerThresholdNonCritical See Common Properties of Classes sint32 UpperThresholdNonCritical See Common Properties of Classes sint32 LowerThresholdCritical See Common Properties of Classes sint32 UpperThresholdCritical See Common Properties of Classes sint32 SupportedThresholds An array representing the uint16 thresholds supported by this sensor.
CIM_TemperatureSensor The CIM_TemperatureSensor class described in Table below contains sensors that sample ambient temperature and return a value in degrees celsius. Table 22.
IsLinear See Common Properties of Classes Boolean LowerThresholdNonCritical See Common Properties of Classes sint32 UpperThresholdNonCritical See Common Properties of Classes sint32 LowerThresholdCritical See Common Properties of Classes sint32 UpperThresholdCritical See Common Properties of Classes sint32 CIM_VoltageSensor The CIM_VoltageSensor class described in Table below contains sensors that measure voltage and return a value in volts. Table Table 24.
Table 25.
Class Name: CIM_WatchDog Parent Class: CIM_LogicalDevice Property Description Data Type TimerResolution Indicates the resolution of the watchdog timer. For example, if this value is 100, then the timer can expire anytime between –100 microseconds and +100 microseconds. uint32 CIM_CoolingDevice The CIM_CoolingDevice class described in CIM_CoolingDevice contains a set of devices that work to keep the ambient internal temperature of the system at a safe value. Table 27.
VariableSpeed Specifies if the fan supports variable speeds. Boolean DesiredSpeed Indicates the currently requested fan speed, defined in RPM. When the VariableSpeed value is TRUE, the fan supports variable speeds. When a variable speed fan is supported (VariableSpeed is TRUE), the actual speed is determined using a sensor (CIM_Tachometer) that is associated with the fan.
uint16 PointingType Indicates the type of pointing device. Values for the PointingType property are: 1 — Other 2 - Unknown 3 - Mouse 4 - Trackball 5 - Trackpoint 6 - Glidepoint 7 - Touch pad 8 - Touch screen 9 - Mouse — optical sensor NumberOfButtons Indicates the number of buttons. If the uint8 CIM_PointingDevice has no buttons, a value of 0 is returned. Handedness Integer indicating if the uint16 CIM_PointingDevice is configured for right- or left-handed operation.
keyboard, preventing local input. Values for thePassword property are: 1 - Other 2- Unknown 3- Disabled 4- Enabled 5- Not implemented CIM_PowerSupply The CIM_PowerSupply class described in Table below contains devices that provide current and voltage for the operation of the system and its components Table 32.
3 - Range 1 4 - Range 2 5 - Both range 1 and range 2 6 - Neither range 1 nor range 2 TotalOutputPower Represents the total output power of the power supply in milliwatts. A value of 0 denotes that the power output is unknown. uint32 PMCapable Indicates the Power Monitoring capability. Boolean CIM_Controller The CIM_Controller class described in below Table properties , groups miscellaneous control-related devices.
The CIM_ParallelController class described in below contains a set of objects that control parallel devices. Parallel controllers transfer 8 or 16 bits of data at a time to the devices they control, for example, a parallel port controlling a printer. Table 34. CIM_ParallelController Properties Class Name: CIM_ParallelController Parent Class: CIM_Controller Property Description Data Type DMASupport Set to TRUE if the parallel controller supports DMA.
4 - External interface locked out 5 - External interface enabled 6 - Boot bypass CIM_PCIController The CIM_PCIController class described in Table below contains a set of devices that follow the Peripheral Component Interconnect (PCI) protocol defined by the Personal Computer Memory Card International Association (PCMCIA). The PCI protocol defines how data is transferred between devices. The CIM_PCIController class contains PCI adapters and bridges. Table 36.
CIM_PCIDevice The CIM_PCIDevice class shown in Table below describes the capabilities and management of a PCI device controller on an adapter card. Table 37. CIM_PCIDevice Properties Class Name: CIM_PCIDevice Parent Class: CIM_PCIController Property Description Data Type BaseAddress Identifies an array of up to six doubleword base memory addresses. uint32 SubsystemID Identifies a subsystem identifier code. uint16 SubsystemVendorID Identifies a subsystem vendor ID.
Table 38. CIM_PCIBridge Properties Class Name: CIM_PCIBridge Parent Class: CIM_PCIController Property Description Data Type BaseAddress Identifies an array of double-word base memory addresses. uint32 BridgeType Indicates the type of bridge. A bridge is PCI to , except for the Host, which is a host-to-PCI bridge. Values for the BridgeType property are as follows: 0 - Host 1 - ISA 128 - Other uint16 BaseAddress Identifies an array of double-word base memory addresses.
4 - ZIF socket 5 - Replacement/piggy back 6 - None 7 - LIF socket 8 - Slot 1 9 - Slot 2 10 - 370-pin socket 19 - Socket mPGA604 20 - Socket LGA771 21 - Socket LGA775 22 - Socket S1 23 - Socket AM2 24 - Socket F (1207) 25— Socket LGA1366 MaxClockSpeed Indicates the maximum speed (in MHz) of this microprocessor. uint32 Core count Indicates the number of core processors detected. uint16 CoreEnabledCount Indicates the number of core processors enabled.
Bit 2 — eXecute Disable (XD) supported Bit 3 — Hyper Threading (HT) supported ExtendedStates Indicates the setting of the extended uint16 capabilities of the processor. This attribute is a bit field. The following are the definitions of a bit when set to one: Bit 0 — Virtualization Technology (VT) enabled Bit 1 — Demand-Based Switching (DBS) enabled Bit 2 — eXecute Disable (XD) enabled Bit 3 — Hyper Threading (HT) enabled CPUStatus uint16 Indicates the current status of the microprocessor.
17 - Pentium III 18 - M1 family 19 - M2 family 24 — AMD Duron processor 25 — K5 family 26 - K6 family 27 - K6 -2 28 - K6-3 29 - AMD Athlon processor family 30 - AMD29000 family 31 - K6-2+ 32 - Power PC family 33 - Power PC 601 34 - Power PC 603 35 - Power PC 603+ 36 - Power PC 604 37 - Power PC 620 38- Power PC X704 39- Power PC 750 40 - Intel Core Duo processor 41 - Intel Core Duo mobile processor 42 - Intel Core Solo mobile processor 43 - Intel Atom processor 48 - Alpha family 49 - Alpha 21064 50 - Alpha
87 - UltraSPARC III 88 - UltraSPARC IIIi 96 - 68040 97 - 68xxx family 98 - 68000 99 - 68010 100 - 68020 101 - 68030 112 - Hobbit family 120 - Crusoe 5000 family 121 - Crusoe 3000 family 122 - Efficeon 8000 family 128 - Weitek 130 - Itanium processor 131 - AMD Athlon 64 processor family 132 - AMD Opteron processor family 133 - AMD Sempron processor family 134 - AMD Turion 64 Mobile technology 135 - Dual-Core AMD Opteron processor family 136 - AMD Athlon 64 X2 Dual-Core processor family 137 - AMD Turion 64 X2
163 - Quad-Core Intel Xeon processor 5300 Series 164 - Dual-Core Intel Xeon processor 5100 Series 165 - Dual-Core Intel Xeon processor 5000 Series 166 - Dual-Core Intel Xeon processor LV 167 - Dual-Core Intel Xeon processor ULV 168 - Dual-Core Intel Xeon processor 7100 Series 169 - Quad-Core Intel Xeon processor 5400 Series 170 - Quad-Core Intel Xeon processor 171- Dual-Core Intel Xeon processor 5200 Series 172- Dual-Core Intel Xeon processor 7200 Series 173 - Quad-Core Intel Xeon processor 7300 Series 174-
197- Intel Core 2 Solo mobile processor 198 - Intel Core i7 processor 199 - Dual-Core Intel Celeron processor 200 - S/390 and zSeries family 201- ESA/390 G4 202- ESA/390 G5 203- ESA/390 G6 204 - z/Architecture base 206 - CEh 206 Intel Core i3 processor 214 - Multi-Core Intel Xeon processor 215 - Dual-Core Intel Xeon processor 3xxx Series 216 - Quad-Core Intel Xeon processor 3xxx Series 217 - D9h 217 VIA Nano processor family 218 - Dual-Core Intel Xeon processor 5xxx Series 219 - Quad-Core Intel Xeon process
300 - 6x86 301 - MediaGX 302 - MII 320 - WinChip 350- DSP 500 - Video processor CIM_StorageExtent The CIM_StorageExtent identified in Table below contains devices that manage data storage, for example, hard drives or microprocessor memory. Table 40.
CIM_CacheMemory The CIM_CacheMemory class described in CacheMemoryProperties describes the capabilities and management of cache memory. Cache memory allows a microprocessor to access data and instructions faster than normal system memory Table 42. CIM_CacheMemory Properties Class Name: CIM_CacheMemory Parent Class: CIM_Memory Property Description Data Type Level Defines if this is the primary, secondary, or tertiary cache.
3- Instruction 4- Data 5- Unified LineSize Indicates the size, in bytes, of a single uint32 cache bucket or line. ReadPolicy Defines the policy used by the cache uint16 for handling read requests.
CIM_BIOSElement The CIM_BIOSElement class listed in BIOSElement Properties describes the BIOS for the system. The BIOS controls the following: • Communications between the microprocessor and peripheral devices, such as the keyboard and the video adapter. • Miscellaneous functions, such as system messages. Table 44. CIM_BIOSElement Properties Class Name: CIM_BIOSElement Parent Class: CIM_SoftwareElement Property Description Data Type Version Provides the product version information.
Table 45. CIM_SoftwareFeature Properties Class Name: CIM_SoftwareFeature Parent Class: CIM_LogicalElement Property Description Data Type IdentifyingNumber Provides product identification such as a serial number of the software string ProductName Identifies the commonly used product string name. Vendor Identifies the name of the product’s supplier. Corresponds to the vendor property in the product object in the DMTF solution exchange standard.
Class Name: DELL_SoftwareFeature Parent Class: CIM_SoftwareFeature Property Description AgentVersion Defines the version information of local string CIM agent (same as ISVC version.) Data Type CIM_SystemResource The CIM_SystemResource class described in Table below provides access to system resources from an operating system. System resources consist of interrupt requests (IRQs) and direct memory access (DMA) capabilities. Table 47.
Availability Indicates the availability of the IRQ. uint16 Values for the Availability property are as follows: 1- Other 2- Unknown 3- Available 4 - In use/not available 5- In use and available TriggerLevel Indicates if the interrupt is triggered by the hardware signal going high or low. Values for the TriggerLevel property are as follows: 1- Other 2- Unknown 3- Active low 4- Active high uint16 TriggerType Indicates if edge (value=4) or level triggered (value=3) interrupts occur.
CIM_MemoryMappedIO The CIM_MemoryMappedIO class described in properties Table below addresses both memory and port I/O resources for personal computer architecture memory mapped I/O. Table 49.
Table 50. CIM_DMA Properties Class Name: CIM_DMA Parent Class: CIM_SystemResource Property Description Data Type CSCreationClassName See Common Properties of Classes string CSName. See Common Properties of Classes string CreationClassName See Common Properties of Classes string DMAChannel A part of the object’s key value, the DMA channel number. uint32 Availability Availability of the DMA.
0- Unknown 1- Other 2- Fully redundant. Fully redundant all of the configured redundancy is still available. 3 - Degraded redundancy. Degraded redundancy - that some failures have been experienced but some reduced amount of redundancy is still available. 4 - Redundancy lost. Redundancy lost - that a sufficient number of failures have occurred so that no redundancy is available and the next failure experienced causes overall failure.
The DELL_PSRedundancyGroup described in Table below is a Dell-specific extension of the CIM_ExtraCapacityGroup class. The DELL_PSRedundancyGroup class defines what constitutes power supply redundancy in a system. Table 53. DELL_PSRedundancyGroup Properties Class Name: DELL_PSRedundancyGroup Parent Class: CIM_ExtraCapacityGroup DELL_FanRedundancyGroup The DELL_FanRedundancyGroup described in Table below defines what constitutes fan redundancy in a system. Table 54.
The CIM_ServiceAccessPoint class described in Table below represents the ability to utilize or invoke a service. Access points indicate that a service is available to other entities for use. Table 56.
Class Name: CIM_RemoteServiceAccessPoi ntGroup Parent Class: CIM_ServiceAccessPointGrou p Property Description Data Type 100 - Dial String 101 - Ethernet Address 102 - Token Ring Address 103 - ATM Address 104 - Frame Relay Address 105..199 - DMTF Reserved 200 - URL 32768..65535 - Vendor Specific DELL_RemoteServiceAccessPort The DELL_RemoteServiceAccessPort class described in Table below is an extended class of the CIM_RemoteServiceAccessPoint class.
10- iDRAC6 11 - iDRAC6 for modular systems 13 - BMC 16 - iDRAC7 17 - iDRAC7 for modular systems 67
4 Dell-Defined Classes Dell-defined classes are defined and populated by Dell rather than by the Common Information Model (CIM). For information on how the logs are formatted, see DELL_Chassis Properties. The DELL_EsmLog class described in DELL_EsmLog Properties records failure threshold violations collected by Server Administrator’s embedded server management (ESM) capabilities. Table 59.
The DELL_CMApplication class described in DELL_CMApplication contains information related to the Dell change management applications. Table 61. DELL_CMApplication Class Name: DELL_CMApplication Parent Class: None Property Description Data Type componentType Defines the application type. string subComponentID Defines an application string. string version Indicates the current version of the application. string name Indicates the name of the application.
subDeviceID Indicates the ID for additional device. string bus Indicates the PCI bus number. string device Indicates the PCI device number. string function Indicates the PCI function number. string DELL_CMDeviceApplication The DELL_CMDeviceApplication class described in CMDeviceApplication Properties contains information related to the Dell change management association between the device and application. Table 63.
DELL_CMOS The DELL_CMOS class described in DELL_CMOS Properties contains information related to the Dell change management operating system. Table 65. DELL_CMOS Properties Class Name: DELL_CMOS Parent Class:None Property Description Data Type architecture Indicates the architecture of the operating system. string vendor Indicates the vendor of the operating system. string majorVersion Indicates the major version of the operating system.
description Provides a short description string of the product. vendor Indicates the name of the product manufacturer. string version Indicates the current version number of the product. string DELL_BIOSExtensions The DELL_BIOSExtensions identified in DELL_BIOSExtensions Properties contains information related to the specific extension of the data attributes on your system. Table 67.
DELL_SDCardDevice The DELL_SDCard Devices identified in DELL_SDCardDevice Properties contains information related to the SD card devices. Table 69. DELL_SDCardDevice Properties Class Name: DELL_SDCardDevice Parent Class: CIM_LogicalDevice Property Description Data Type sdType An enumerated storage device type. The values for this property are: 1 - Other 2 - Unknown 3 - Hypervisor SD 4 - Virtual Flash SD uint8 sdCertified Indicates the licensing information of SD media.
The Dell_Network Port class described in DELL_NetworkPort Properties represents the Dell-specific features of the network adapters. Table 70. DELL_NetworkPort Properties Class Name: DELL_NetworkPort Parent Class: CIM_Network Port Property Description NIC Capabilities NIC Capabilities bitmask indicates the uint 32 capabilities of the NIC. The bitmask for the NIC Capability property are: Bit 0, Value 0 - Reporting NIC capabilities through this attribute is not supported.
Values for the NIC RDMA Capability property are: 0 - NIC/driver does not support querying for capability. 1 - NIC/driver supports querying for capability but query returned an error. 2 - NIC/driver supports querying for capability and querying indicates that it is capable. 4 - NIC/driver supports querying for capability and querying indicates that it is not capable. 8 - NIC/driver supports querying for capability but an error prevented querying the NIC/driver.
3 - Driver is bad 4 - Driver is disabled 10 - Hardware is initializing 12 - Hardware is closing 13 - Hardware is not ready BusNumber Indicates the PCI bus number. uint 8 DeviceNumber Indicates the PCI device number. uint 8 FunctionNumber Indicates the PCI function number. uint 8 DriverVersion Indicates the NIC driver version. string IPAddresss Indicates the NIC IP address. string SubnetMask Indicates the NIC subnet mask. string DHCPServer Indicates the DHCP server.
DELL_PowerConsumptionWattsSensor The DELL_PowerConsumptionWattsSensor identified in DELL_PowerConsumptionWattsSensor contains information related to monitoring the power consumption. Table 72.
Class Name: DELL_PowerConsumptionData Parent Class: CIM_Logical Device peakHeadRoom Is the function used to set the power budget. uint 32 DCIM_OEM_DataAccessModule The DCIM_OEM_DataAccessModule class is derived from the CIM_ManagedElement class. This class models hardware information in a proprietary format. Class Name: DCIM_OEM_DataAccessModule Parent Class: CIM_ManagedElement Property Description Data Type InstanceID Identifies the instance.
DCIM_RegisteredProfile The DCIM_RegisteredProfile class is derived from the CIM_RegisteredProfile class. This class advertises the capabilities of DCIM_OEM_DataAccessModule.
CIM_Dependency 5 The CIM_Dependency class is an association used to establish dependency relationships between two managed system elements. The CIM_Dependency class described in the figure below does not have a parent class because it is a relationship or association between two elements.
CIM_PackageTempSensor The CIM_PackageTempSensor class described in CIM_PackageTempSensor Properties contains temperature sensors that are often installed in a package such as a chassis or a rack to assist in the monitoring of the package in general. This relationship is described by the CIM_PackageTempSensor association. Table 75.
CIM_PackageCurrentSensor The CIM_PackageCurrentSensor class described in CIM_PackageCurrentSensor Properties contains amperage sensors that are often installed in a package such as a chassis or a rack to assist in the monitoring of the package in general. This relationship is described by the CIM_PackageCurrentSensor association. Table 77.
The CIM_PackagePowerSupplySensor class described in CIM_PackagePowerSupplySensor Properties contains power supplies that provide power to the whole package. Table 79. CIM_PackagePowerSupplySensor Properties Class Name: CIM_PackagePowerSupplySensor Parent Class: CIM_Dependency Element Description Antecedent CIM_PowerSupplySensor refers to the power supply sensor that monitors wattage for the entire package. Dependent CIM_PhysicalPackage refers to the package whose wattage is being monitored.
Parent Class: CIM_Dependency Element Description Antecedent CIM_PowerSupplySensor refers to the power supply sensor that monitors wattage for the entire package. Dependent CIM_PhysicalPackage refers to the package whose wattage is being monitored. DELL_AssociatedSupplyPCAmps The DELL_AssociatedSupplyPCAmps class described in DELL _AssociatedSupplyPCAmps is a PowerConsumptionAmpsSensor associated with a CIM_PowerSupply which is defined by this class. Table 82.
Table 84. AssociatedSystemPCData Class Name: DELL_AssociatedSupplyPCAmp s Parent Class: CIM_Dependency Property Description Antecedent Indicates the Dell_System instance. uint 16 Dependent Indicates the PowerConsumptionData associated with the Power Supply. Data Type uint 16 DELL_PowerProfileData The DELL_PowerProfileData identified in DELL _PowerProfileData contains information related to power profiling and power knob data. Table 85.
