Read me

Internet Explorer 8 has a new security feature called "Loopback security check" which prevents NTLM-
based authentication from the local machine. This feature blocks users from performing any set operation
in Server Administrator if they are logged in using single sign-on (SSO), (clicking the Server Administrator
desktop icon) on Internet Explorer 8.
Issue 17: DF380725: On IE or Firefox Web browsers, you cannot attach files to an e-mail if the filename
contains non-ASCII letters.
To attach files to an e-mail, rename files to contain ASCII characters.
Issue 18: On Yx2x servers, Server Administrator displays the Embedded Systems Management (ESM) or
hardware logs. However, when the maximum limit for number of logs that can be recorded is reached, the
existing oldest logs are overwritten. But for Yx1x servers or below, when the maximum limit is reached, the
information logging is stopped.
Issue 19: DF523827: On Citrix XenServer 6.0, if the Alert on Console alert action is configured from the
Server Administrator CLI or GUI, the alert message may not be displayed in a readable format.
Issue 20: DF530134: On VMware ESX 4.1 managed node, while USB arbitration service is running, Inventory
Collector does not respond while stopping the Server Administrator services.
To resolve this issue, stop the USB arbitration service and run the Inventory Collector.
To stop the USB arbitration service:
1. Run the “ps aux|grep usb” command to check if the USB arbitration service is running.
2. Run the “chkconfig usbarbitrator off” command to prevent the USB arbitration service from
starting during boot.
3. After the USB arbitrator service is stopped, reboot the server to allow the Inventory collector to
run.
Issue 21: DF520449: On all versions of the ESX, the following USB connection error messages are generated.
These messages can be ignored.
The following shows a typical message:
Vendor: iDRAC Model: MAS022 Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
Vendor: iDRAC Model: SECUPD Rev: 0329
Type: Direct-Access ANSI SCSI revision: 02
(520449)
Issue 22: DF531509: The setup and/or system password configuration from Server Administrator GUI or CLI
is successful, but the password is displayed as blank instead of asterisk (*) on the F2 BIOS page.