Reference Guide

20 Introduction
NOTE: Due to limitations, some commands do not alter the system settings even
though the commands are executed successfully. This is an expected behavior.
Failure Messages
CLI failure messages provide reasons why some commands do not succeed.
Some common reasons why commands fail include syntax errors and
components that are not present. Many error messages provide syntax
information required to execute the command successfully.
If you execute a command for a component or feature that is not present in
the system configuration, the error message states that the component is not
present.
Command:
omconfig chassis volts index=3 minwarnthresh=
3.3000
Table 1-2. Commands and Messages
Command Message
omconfig chassis temps
index=0 warnthresh=
default
Temperature probe warning
threshold value(s) set
successfully.
omconfig chassis biossetup
attribute=numlock
setting=on
BIOS setup configured
successfully. Change will
take effect after the next
reboot.
omconfig system assetinfo
info=depreciation
duration=6
Asset information set
successfully.