Reference Guide

Introduction 19
Table 1-1 lists the primary CLI commands used by Server Administrator.
This guide contains a section for each primary command.
NOTE: The omupdate commands are no longer supported in Server Administrator
and are replaced by Dell Update Package or the Server Update Utility commands. To
update the different components, download the Dell Update Package and run the
<package name> /s [/f]command. For more information on the
corresponding CLI syntax, see the Dell Update Packages for Operating Systems User’s
Guide or the Dell OpenManage Server Update Utility User’s Guide at
support.dell.com/manuals.
Additional useful topic about the CLI include:
• "Working With CLI Command Results" on page 285
CLI Error Checking and Error Messages
When you type CLI commands, the CLI checks these commands for correct
syntax. If you type a command and the command is executed successfully,
a message is displayed, stating that the command is successful.
Success Messages
When you run a successful omconfig command, data for that component is
displayed.
The following table provides examples of valid omconfig commands and their
success messages.
Table 1-1. CLI Commands and Sections in This Guide
Primary CLI
Command
Section Title Related Sections
omconfig "omconfig: Managing Components
Using the Instrumentation Service"
on page 89
"omconfig system or
servermodule assetinfo: Editing
Cost of Ownership Values" on
page 175
omhelp "Using the omhelp Command" on
page 25
omreport "omreport: Viewing System Status
Using the Instrumentation Service"
on page 29