User's Manual

96 Controllers
Controller Properties
The controller properties can vary depending on the model of the controller.
Controller properties may include:
Table 7-3. Controller Properties
Property Definition
Status These icons represent the severity or health of the storage
component.
For more information, see Storage Component Severity.
Normal/OK
Warning/Non-critical
Critical/Fatal
ID This property displays the controller ID assigned to the
controller by Storage Management. Storage Management
numbers the controllers attached to the system starting with
zero. This number is the same as the controller ID number
reported by the
omreport Command. For information on
Command Line Interface, see the Dell OpenManage Server
Administrator Command Line Interface User’s Guide at
support.dell.com/manuals.
Name This property displays the name of the controller.
State This property displays the current status of the controller.
Possible values are:
Ready—The controller is functioning normally.
Degraded—The controller has encountered a failure and is
operating in a degraded state.
Failed—The controller has encountered a failure and is no
longer functioning.