User's Manual
78 Storage Information and Global Tasks
Table 6-2. Controller Properties
Property Definition
Status This property displays the controller status.
ID This property displays the controller ID as reported by the
omreport CLI command.
Name This property displays the name of the controller. For more
detailed information on a controller, click its name.
Slot ID This property displays the slot to which the controller is
attached. On some controllers, Storage Management is
unable to display the slot ID. In this case, this property
displays Slot Not Available. For embedded controllers, this
property displays Embedded.
NOTE: If Slot Not Available is displayed, you may be able to
identify the slot ID by selecting the SystemMain System
Chassis Slots object in the tree view and displaying the
Information tab. The Slot ID property on this tab may display
the correct information.
State This property displays the current status of the controller.
Possible values are:
Ready—The controller is functioning normally.
Degraded—The controller has suffered a failure of a
component and is operating in a degraded state.
Failed—The controller has suffered a failure of one or more
components and is no longer functioning.
Firmware Version This property displays the version of the controller’s
firmware.
The firmware and drivers listed in the Readme file refer to
the minimum supported version for these controllers. Later
versions of the firmware and drivers are also supported. For
the most recent driver and firmware requirements, see
support.dell.com.