User's Manual

Troubleshooting 295
A Corrupt Disk or Drive Message Suggests Running autocheck During a
Reboot
Let autocheck run, but do not worry about the message. The reboot
completes after autocheck is finished. Depending on the size of your system,
this may take about ten minutes.
Erroneous Status and Error Messages after a Windows Hibernation
Activating the Windows hibernation feature may cause Storage Management
to display erroneous status information and error messages. This problem
resolves itself when the Windows operating system recovers from
hibernation.
Storage Management May Delay Before Updating Temperature Probe
Status
In order to display the enclosure temperature and temperature probe status,
Storage Management polls the enclosure firmware at regular intervals to
obtain temperature and status information. On some enclosures, there is a
short delay before the enclosure firmware reports the current temperature
and temperature probe status. Because of this delay, Storage Management
may require one or two minutes before displaying the correct temperature
and temperature probe status.
Storage Management May Delay Displaying Storage Devices After
Reboot
Storage Management requires time after a reboot to find and inventory all
attached storage devices. You may experience a delay in storage controllers
being displayed until this operation has completed.
You are Unable to Log into a Remote System
Access can be denied here if you do not enter a user name and password that
match an administrator account on the remote computer or if you mistype
the login information. The remote system may also not be powered on or
there may be network problems.