User's Manual

268 Moving Physical and Virtual Disks from One System to Another
5 This reads the data on the physical disks to restore the RAID controller’s
proprietary configuration information. Press Esc and save the new
configuration when prompted.
6 Press the Esc key and save the new configuration when prompted.
7 Reboot the system.
Migrating SAS Virtual Disks to Another System
The following describes how to migrate virtual disks and volumes from one
system to another.
1
Turn off the system that the physical disks are being moved from.
2 If the receiving controller does not have a preexisting virtual disk
configuration, then turn off its server.
3 Place the physical disks into the new enclosure.
4 Start up the system connected to the receiving controller.
5 Use the Foreign Configuration Operations task to import the migrated
virtual disks on the receiving controller.
NOTE: The Foreign Configuration Operations are not supported on PERC
S100, S110, and S300 controllers.
The migration is complete. The virtual disk is now manageable through
Storage Management.