User's Manual

Virtual Disks 235
in Resynching state causes the virtual disk to be in a Failed Redundancy state. For
more information, see Considerations for Concatenated to RAID 1 Reconfiguration
on CERC SATA1.5/6ch Controllers.
Resume Check Consistency
Does my controller support this feature? See Supported Features.
Use the Resume Check Consistency task to resume a check consistency after
it has been paused.
Blink and Unblink (Virtual Disk)
Does my controller support this feature? See Supported Features.
The Blink and Unblink tasks blink or unblink the lights on the physical disks
included in the virtual disk. For more information, see Blink and Unblink
(Virtual Disk).
Rename
Does my controller support this feature? See Supported Features.
Use the Rename task to change the virtual disk’s name. For more
information, see Virtual Disk Task: Rename.
NOTE: On the CERC SATA1.5/2s controller, you cannot change the default name of
a concatenated virtual disk.
NOTE: Renaming a virtual disk generates alert 2159. On the CERC SATA1.5/6ch and
CERC SATA1.5/2s controllers, alert 2159 displays the new virtual disk name. On the
PERC 4/SC, 4/DC, 4e/DC, 4/Di, 4/IM, 4e/Si, and 4e/Di controllers, alert 2159 displays
the original virtual disk name.
Cancel Rebuild
Does my controller support this feature? See Supported Features.
Use the Cancel Rebuild task to cancel a rebuild while it is in progress.