User's Manual

Connectors 175
Table 9-1. Component Severity
Connector Information
For information on the connector, see the following topics:
• Connectors
• Connector Properties and Tasks
Connector Components
For information on attached components, see the following topic:
• Enclosures and Backplanes
Connector Properties and Tasks
Use this window to view information about the connector and execute
connector tasks.
Connector Properties
The connector properties can vary depending on the model of the controller.
Connector properties may include:
Severity Component Status
Normal/OK. The component is working as expected.
Warning/Non-critical. A probe or other monitoring device
has detected a reading for the component that is above or
below the acceptable level. The component may still be
functioning, but it could fail. The component may also be
functioning in an impaired state. Data loss is possible.
Critical/Failure/Error. The component has either failed or
failure is imminent. The component requires immediate
attention and may need to be replaced. Data loss may have
occurred.