User's Manual

Enclosures and Backplanes 165
Power Supply Properties
Use this window to view information about the enclosure’s power supplies.
Table 8-5. Power Supply Properties
Property Definition
Status These icons represent the severity or health of the storage
component.
Normal/OK
Warning/Non-critical
Critical/Fatal
For more information, see Storage Component Severity.
Name This property displays the name of the power supply.
State This property displays the current status of the power
supply.
Ready—The power supply is functioning normally.
Degraded—The power supply has encountered a failure
and is operating in a degraded state.
Failed—The power supply has encountered a failure and is
no longer functioning. Storage Management may also be
unable to communicate with the enclosure using SES
commands. The Failed state is displayed when the
enclosure does not respond to a status query from Storage
Management for any reason. For example, disconnecting
the cable would cause this state to be displayed.
Missing—The power supply is not present in the enclosure.
Part Number This property displays the part number of the power
supply.
This property is not displayed for the PowerVault 22xS
enclosures that have E.17 firmware or later.