User's Manual

Enclosures and Backplanes 159
Set Asset Data
Does my enclosure support this feature? See Supported Features.
You can change the enclosure’s asset tag and asset name. The new asset tag
and asset name that you specify are displayed on the enclosure’s
Information/Configuration subtab.
To change the enclosure’s asset tag and asset name:
1 Type the new asset tag name in the New asset tag text box. You can
specify an inventory number or other useful information for your
environment. The asset tag typically refers to the enclosure hardware.
2 Type the new asset name in the New asset name text box. You can specify
a name useful to you for organizing your storage environment. For
example, the asset name could refer to the type of data stored on the
enclosure or to the enclosure’s location.
3 Click Apply Changes . To exit and cancel your changes, click Go Back To
Enclosure Information Page
.
To locate this task in Storage Management:
1 Expand the Storage tree object to display the controller objects.
2 Expand a controller object.
3 Expand a Connector object.
4 Select the enclosure object.
5 Select the Information/Configuration subtab.
6 Select Set Asset Data from the Available Tasks drop-down menu.
7 Click Execute .
Set Temperature Probe Values
Does my enclosure support this feature? See Supported Features.
The temperature probes monitor the enclosure’s temperature. Each
temperature probe has a Warning and a Failure threshold. The Warning
threshold indicates that the enclosure is approaching an unacceptably warm
or cool temperature. You can modify the Warning threshold.