User's Manual

156 Enclosures and Backplanes
Disable Alarm (Enclosure)
Does my enclosure support this feature? See Supported Features.
Use the Disable Alarm task to disable the enclosure alarm. When disabled,
the alarm does not sound when the enclosure exceeds a warning threshold for
temperature or experiences other error conditions such as a failed fan, power
supply, or controller. If the alarm is already sounding, you can turn it off with
this task.
Set Asset Data
Does my enclosure support this feature? See Supported Features.
Use the Set Asset Data task to specify the enclosure’s asset tag and asset
name. See Set Asset Data for more information.
Blink
Does my enclosure support this feature? See Supported Features.
Use the Blink task to blink the light-emitting diodes (LEDs) on the
enclosure. You may want to use this task to locate an enclosure. The LEDs on
the enclosure may display different colors and blinking patterns. Refer to the
enclosure hardware documentation for more information on what the blink
colors and patterns indicate.
Set Temperature Probe Value
Does my enclosure support this feature? See Supported Features.
Use the Set Temperature Probe Values task to specify the Warning and
Failure thresholds for the enclosure’s temperature probes. See Set
Temperature Probe Values for more information.