User's Manual

Enclosures and Backplanes 151
Table 8-1. Component Severity
Enclosure and Backplane Information
For information on enclosures and backplanes, see the following topics:
• Enclosures and Backplanes
• Enclosure and Backplane Properties and Tasks
Enclosure and Backplane Components
For information on attached components, see the following topics:
• Physical Disks or Physical Devices
Enclosure and Backplane Properties and Tasks
Use this window to view information about the enclosure or backplane and
execute enclosure tasks.
Enclosure and Backplane Properties
The enclosure or backplane properties can vary depending on the model of
the controller. Enclosure or backplane properties may include:
Severity Component Status
Normal/OK. The component is working as expected.
Warning/Non-critical. A probe or other monitoring device
has detected a reading for the component that is above or
below the acceptable level. The component may still be
functioning, but it could fail. The component may also be
functioning in an impaired state. Data loss is possible.
Critical/Failure/Error. The component has either failed or
failure is imminent. The component requires immediate
attention and may need to be replaced. Data loss may have
occurred.