User's Manual

Controllers 143
Convert to RAID Capable Disks
On Dell PERC H310 adapters, drop-down the controller tasks drop-down
menu and select the task Convert to RAID Capable disks:
1
The non-RAID disks are displayed. Select the drives that you want to
convert.
2 Click Apply .
The acknowledgement that the disks have been converted is displayed.
Patrol Read Report
Does my controller support this feature? See Supported Features.
This report provides information on all the Patrol Reads done on the
controller in the chronological order. It provides information such as last run
time and result. If the Patrol Read fails, it provides the reason for the failure.
To locate this task in Storage Management:
1 Click Storage to view the dash board.
2 Select View Patrol Read Report from the Select Report drop-down
menu.
3 Click Execute.
Check Consistency Report
Does my controller support this feature? See Supported Features.
This report provides information on all the Consistency Checks done on the
controller in a chronological order. It provides information such as last run
time and result. If the Consistency Check fails, it provides the reason for the
failure.
To locate this task in Storage Management:
1 Click Storage to view the dash board.
2 Select View Check Consistency Report from the Select Report drop-
down menu.
3 Click Execute.