User's Manual

Controllers 131
2 Select a controller object.
3 Select the Information/Configuration subtab.
4 Select Change Controller Properties... from the Controller Tasks drop
down menu.
5 Click Execute .
Related Information:
•Set Rebuild Rate
• Set Background Initialization Rate
• Set Check Consistency Rate
• Set Reconstruct Rate
•
Abort check consistency on error
• Revertible Hot Spare
•
Loadbalance
• Redundant Path Configuration
Manage Physical Disk Power
Does my controller support this feature? See Supported Features.
The Manage Physical Disk Power task allows you to manage the power
consumed by the physical disks.
NOTE: The Manage Physical Disk Power task is provided with PERC H700, H800,
and H310 cards by spinning down the hot spares and unconfigured disks. PERC
H710, H710P, and H810 cards also support the Manage Physical Disk Power task
with additional power saving modes, Spin Down Configured Drives, and Automatic
Disk Power Saving (Idle C) options.
You can enable one of the following modes to manage power consumed:
• No Power Savings Mode—This is the default mode for the controller. In
this mode, all power saving features are disabled.
• Balanced Power Savings Mode—provides good power savings while
limiting I/O latency.
• Maximum Power Savings Mode—provides maximum power savings for all
drives.