User's Manual

126 Controllers

Table 7-6. Component Health

However, if the communication channel between any two enclosures is lost,

the redundant path configuration is degraded and the health of the logical

connector is displayed as degraded. For a brief outline of this scenario, see

Tabl e 7 -7 .

Table 7-7. Component Health

In this case, the enclosure status is displayed in warning mode. The

Enclosures page displays all enclosure components (EMMs, Fans, Physical

Disks, Power Supplies, and Temperature) to be in normal condition. Select

the Information/Configuration subtab of the enclosure. This page displays

the Path Failure message to indicate that the enclosure has lost a

communication path to the controller, thereby indicating that the enclosure

is no longer in redundant path mode. For more information, see Path Health.

Health of Logical

Connector

Path between Controller and Enclosure 1

Connector 0 (C0) Connector 1 (C1)

Available Available

Available Disconnected

Disconnected Available