User's Manual

Controllers 123
4 Select Set Check Consistency Rate from the Available Tasks drop-down
menu.
5 Click Execute .
You can also locate this task from the Change Controller Properties drop
down menu. For more information, see Change Controller Properties.
Related Information:
• Check Consistency
•Cancel Check Consistency
Set Reconstruct Rate
Does my controller support this feature? See Supported Features.
The Set Reconstruct Rate task changes the amount of system resources
dedicated to the reconstruct task.
The reconstruct task remakes the virtual disk after you have changed the
RAID level or otherwise reconfigured the virtual disk. The reconstruct rate,
configurable between 0% and 100%, represents the percentage of the system
resources dedicated to running the reconstruct task. At 0%, the reconstruct
has the lowest priority for the controller, takes the most time to complete, and
is the setting with the least impact to system performance. A reconstruct rate
of 0% does not mean that the reconstruct is stopped or paused.
At 100%, the reconstruct is the highest priority for the controller, the
reconstruct time is minimized, and is the setting with the most impact to
system performance.
To change the controller’s reconstruct rate:
1 Type a numerical value in the New Reconstruct Rate text box. The value
must be within the 0 – 100 range.
2 Click Apply Changes . To exit and cancel your changes, click Go Back to
Previous Page
.
To locate this task in Storage Management:
1 Expand the Storage tree object to display the controller objects.