User's Manual

120 Controllers
Vendor ID This property displays the disk’s hardware vendor.
Product ID This property displays the disk’s product ID.
Revision This property displays the drive’s firmware version.
Serial No. This property displays the disk's serial number.
Negotiated Speed This property displays the speed of data transfer that the disk
negotiated while spinning up and upon initial communication
with the controller. This speed is dependent on the speed of
the disk, the capable speed of the controller, the current speed
of the controller on that connector, and the speed of the
Enclosure Management Module (EMM) on the enclosure.
Capable Speed This property displays the highest possible speed with which
the device can transfer data.
Manufacture Day This property displays the day of the month on which the
physical disk was manufactured.
Manufacture
Week
This property displays the week of the year during which the
physical disk was manufactured.
Manufacture Year This property displays the year in which the physical disk was
manufactured.
SAS Address This property displays the SAS address of the physical disk.
The SAS address is unique to each SAS disk.
After Import
Status
This property displays what the status of the physical disk
would be after the foreign configuration has been imported.
Possible values are:
•Foreign
•Online
•Offline
•Replaced
•Rebuild
Product ID It is the serial number of the drive and can be used as a unique
number to identify the disk.
Encryption
Capable
This property displays whether the physical disk is a Self
Encryption Disk (SED.) The possible values are Yes and No.
Property Definition