User's Manual

Controllers 117
The following table describes properties for physical disks in the foreign
configuration.
Table 7-5. Physical Disk Properties
Property Definition
Status These icons represent the severity or health of the storage
component.
Normal/OK
Warning/Non-critical
Critical/Fatal
For more information, see Storage Component Severity.
Name This property displays the name of the physical disk. The
name is comprised of the connector number followed by the
disk number.
State This property displays the current state of the physical disk.
After Import State This property displays the after-import state of the physical
disk. The physical disk can be imported in any of the following
states.
Online—The physical disk is part of the imported virtual disk
and functions normally.
Offline—The physical disk is offline after import to the
virtual disk.
Foreign—The virtual disk containing the physical disk cannot
be imported and the physical disk remains in foreign state.
Rebuild—After import of virtual disk, the physical disk
rebuilds.
Replacing—A Replace Member Disk task is performed on the
physical disk. For more information, see Replace Member
Disk and Revertible Hot Spare.
Capacity This property displays the full capacity of the disk.