User's Manual

Controllers 103
Available Reports
• Patrol Read Report
• Check Consistency Report
•Slot Occupancy Report
Rescan Controller
Does my controller support this feature? See Supported Features.
On SCSI controllers, a rescan updates configuration changes (such as new or
removed devices) for all components attached to the controller. For
information on when you may want to do a rescan, see Rescan to Update
Storage Configuration Changes.
NOTE: Rescan Controller is not supported on non-RAID SCSI controllers. You must
reboot the system before Storage Management can see configuration changes on
non-RAID SCSI controllers. Otherwise, configuration changes are not reflected in
the Storage Management graphical user interface (GUI).
To rescan a controller:
1 Expand the tree view to display the controller object.
2 Select the Controller object.
3 Click the Configuration/Information subtab.
4 Select Rescan from the Controller Tasks drop-down menu.
5 Click Execute .
You can also locate this task from the Change Controller Properties drop
down menu. For more information, see Change Controller Properties.
Create Virtual Disk
Does my controller support this feature? See Supported Features.
Use the Create Virtual Disk task to launch the Create Virtual Disk Express
Wizard. See Create Virtual Disk Express Wizard (Step 1 of 2) for more
information.