SNMP Reference Guide

Introduction 21
Server Administrator Remote Access MIB
The Server Administrator Remote Access MIB (filename dcs3rmt.mib)
provides in-band information about remote access hardware that may be
present in your system.
The Server Administrator Remote Access MIB structures its MIB objects into
groups of scalar objects or MIB tables that provide related information.
Table 1-3 describes each Server Administrator Remote Access MIB group and
lists the MIB group number assigned to the MIB group. The Server
Administrator Remote Access MIB groups are identified by the SNMP OID
1.3.6.1.4.1.674.10892.1.<MIB group number> where <MIB group number> is
the MIB group number assigned to the MIB group. See the relevant section
for more information about the MIB objects defined in a MIB group.
Server Administrator Baseboard Management Controller, ASF MIB
The Server Administrator BMC MIB (filename DcAsfSrv.mib) provides
information about the traps sent by BMC. The Server Administrator BMC
MIB structures its MIB objects that provide related information. The BMC
MIB groups are identified by the SNMP OID 1.3.6.1.4.1.3183.1.1.<MIB
group number>. The BMC MIB adheres to ASF 2.0 standard and hence the
enterprise ID is wired for management (3183).
26 Traps — defines the types of alerts that can be sent to report the
status of critical components
5000
Table 1-3. Server Administrator Remote Access MIB Sections in This Guide
Section Topic MIB Group
Numbers
19 Remote Access Group — provides information about remote
access hardware that may be present in your system and defines
variables for administrative users, SNMP trap destinations,
modem configuration for dial-up networking, dial-in
configuration, and dial-out destinations
1700
Table 1-2. Server Administrator Instrumentation MIB Sections in This Guide
Section Topics MIB Group
Numbers
book.book Page 21 Tuesday, February 28, 2012 2:19 PM