Reference Guide

8 Introduction
What’s New in this Release
The following new alerts are added:
• 2425 - State change on Physical disk from READY to Non-RAID.
• 2426 - State change on Physical disk from Non-RAID to READY.
• 2429 - Drive Prepared for Removal.
• 2430 - Drive Log Exported.
Messages Not Described in This Guide
This guide describes only event messages logged by Server Administrator and
Storage Management that are displayed in the Server Administrator alert log.
For information on other messages generated by your system, see one of the
following sources:
•The Installation and Troubleshooting Guide or Hardware Owner's Manual
shipped with your system
• Operating system documentation
• Application program documentation
Understanding Event Messages
This section describes the various types of event messages generated by
the Server Administrator. When an event occurs on your system, Server
Administrator sends information about one of the following event types to
the systems management console:
Table 1-1. Understanding Event Messages
Icon Alert Severity Component Status
OK /Normal /
Informational
An event that describes the successful operation of a unit.
The alert is provided for informational purposes and does
not indicate an error condition. For example, the alert may
indicate the normal start or stop of an operation, such as
power supply or a
sensor reading returning to normal.