Reference Guide

System Event Log Messages for IPMI Systems 239
Voltage Sensor Events
The voltage sensor event messages monitor the number of volts across critical
components. These messages provide status and warning information for
voltage sensors for a particular chassis.
The <Sensor Name/
Location> temperature is
within range.
Information Temperature of the backplane,
system board, system inlet, or the
carrier in the specified system
<Sensor Name/Location>
returned to a normal operating
range.
Table 4-2. Voltage Sensor Events
Event Message Severity Cause
<Sensor Name/Location>
voltage sensor detected
a failure <Reading> where
<Sensor Name/Location> is
the entity that this sensor
is monitoring.
Reading is specified in
volts.
For example, 3.860 V.
Critical The voltage of the monitored
device has exceeded the critical
threshold.
<Sensor Name/Location>
voltage sensor state
asserted.
Critical The voltage specified by
<Sensor Name/Location> is in
critical state.
<Sensor Name/Location>
voltage sensor state
de-asserted.
Information The voltage of a previously
reported
<Sensor Name/Location> is
returned to normal state.
Table 4-1. Temperature Sensor Events
(continued)
Event Message Severity Cause