Reference Guide

184 Storage Management Message Reference
2300 The enclosure
is unstable.
Critical /
Failure / Error
Cause: The controller is
not receiving a
consistent response
from the enclosure.
There could be
a firmware problem or
an invalid cabling
configuration. If the
cables are too long, they
degrade the signal.
Action: Power down all
enclosures attached to
the system and reboot
the system. If the
problem persists,
upgrade the firmware to
the latest supported
version. You can
download the most
current version of the
driver and firmware
from support.dell.com.
Make sure the cable
configuration is valid.
See the hardware
documentation for valid
cabling configurations.
Clear Alert:
None
Related
Alert: None
LRA
Number:
2091
854
Table 3-4. Storage Management Messages
(continued)
Event
ID
Description Severity Cause and Action Related
Alert
Information
SNMP
Trap
Numbers