Reference Guide

Introduction 17
Possible memory
module event cause:
<list of causes>
Specifies a list of possible causes for the memory module
event, for example:
Possible memory module event cause:
Single bit warning error rate exceeded
Single bit error logging disabled
Power Supply type:
<type of power
supply>
Specifies the type of power supply, for example:
Power Supply type: VRM
Previous redundancy
state was: <State>
Specifies the status of the previous redundancy message,
for example:
Previous redundancy state was: Lost
Previous state was:
<State>
Specifies the previous state of the sensor, for example:
Previous state was: OK (Normal)
Processor sensor
status: <status>
Specifies the status of the processor sensor, for example:
Processor sensor status: Configuration
error
Redundancy unit:
<Redundancy
location in
chassis>
Specifies the location of the redundant power supply or
cooling unit in the chassis, for example:
Redundancy unit: Fan Enclosure
SD card device
type: <Type of SD
card device>
Specifies the type of SD card device, for example:
SD card device type: Hypervisor
SD card state:
<State of SD card>
Specifies the state of the SD card, for example:
SD card state: Present, Active
Sensor location:
<Location in
chassis>
Specifies the location of the sensor in the specified
chassis, for example:
Sensor location: CPU1
Temperature sensor
value: <Reading>
Specifies the temperature in degrees Celsius,
for example:
Temperature sensor value (in degrees
Celsius): 30
Table 1-2. Event Description Reference
(continued)
Description Line Item Explanation