Read me

Issue 3: DF 516238
Description: Power cycle shuts down server in ESX 4.1 U2 classic .
Resolution: On ESX 4.1 U2 classic, when power cycle operation is done from Remote shutdown page using
Server administrator, the server shuts down instead of Power cycle or reboot.
Issues for Server Administrator Web Server Running on all Linux
Operating Systems
Issue 1: DF 275424, 332775
Description: Domain users unable to login to Windows MN from Linux Web Server.
Resolution: Negotiate authentication is not supported while managing a Windows-based managed node,
from Linux-based Server Administrator web server, remotely. If you run the Server Administrator web
server on a Linux based operating system and try to manage a remote Windows managed system as
domain user, a "login failed" message appears.
You can remotely manage a Windows/Linux based Managed System from a Windows-based Server
Administrator web server.
Issue 2: DF 533809
Description: The Launch Server Administrator icon on the X-Windows desktop launches Server
Administrator in the default Web browser. The corresponding URL uses the default parameters "localhost"
and the port number "1311". Any change in the server IP parameters or a change in the port number for
the Server Administrator renders the icon/link useless.
Resolution: To re-activate the functionality, update the icon file with the correct URL parameters.
Issues for Server Administrator Running on all Supported Operating
Systems
Issue 1:
Description: Due to non-availability of resources, inventory collection may terminate unexpectedly and
restart. If this occurs, the folder "C:\Temp\invcol" may be left as an artifact.
Resolution: The presence of this folder does not affect the functionality of the inventory collection. You
can delete the folder if required.
Issue 2:
Description: After installing Server Administrator from the command prompt, issuing an "omreport" or
"omconfig" command from the same prompt can cause an error.
Resolution: Open a new command prompt and issue commands from the new window.
Issue 3:
Description: If the command log page in the Server Administrator GUI displays an error message indicating
that the XML is malformed, you must clear the command log from the CLI using the "omconfig system
cmdlog action=clear" command.