Read me

short keep alive interval (less than 120 seconds), and the configured action may be triggered. The issue
will be more prevalent in systems that have only one CPU with hyper-threading unsupported/disabled or
systems that are subjected to persistent stressful conditions such as, resource depletion and CPU running
at 100% usage with significantly more threads than normal usage.
The Auto Recovery feature is not enabled by default. If the Auto Recovery feature has been enabled,
increase the System Reset Timer value to at least 120 seconds.
Issue 26:
Description: Using the Internet Explorer browser, if you install Server Administrator on a system that
includes a underscore in its hostname, you must use the IP address of the target system in the browser
URL to launch Server Administrator, as Hostnames with underscores are not supported. For example,
(assuming Server Administrator is listening on port 1311): https://192.168.2.3:1311.
For more information, see the following article on the: Microsoft website
http://support.microsoft.com/kb/312461
Issue 27: DF 152755
Description: The Server Administrator GUI becomes unresponsive when the alerts log has many events.
Resolution: If the Alert Log contains several entries and if you try to navigate to another page, the Server
Administrator GUI may become unresponsive and display the content in about 30 seconds.
Issue 28: DF 172125
Description: Power monitoring probes are shown on certain systems that do not support power monitoring.
Resolution: On certain systems that do not support power monitoring, the Server Administrator reports
the two platform event filters related to power monitoring as "System Power Probe Warning" and "System
Power Probe Failure". These two filters are not supported on these systems. That is, you can view and
configure these filters, but no action will be taken.
Issue 29: DF 185770
Description: Primary User Telephone Number does not accept symbols.
Resolution: On Server Administrator, Under Asset Information->System Information->Primary User
Telephone Number configuration allows only alphanumeric characters.
Issue 30:
Description: The selection of default option for front panel LCD in Server Administrator will display Model
Name whereas the default is Service Tag on the physical LCD.
Issue 31:
Description: In case the Server Administrator does not respond or is locked to your selections on the
component tree, perform the following steps:
1. Click on Preferences. The Preferences page appears.
2. Click on Server Administrator. The items on the front page may respond to your click.
Issue 32:DF 277439
Description: Persistence of Configuration and Log File Changes in VMware(R) ESXi (277439)