Installation manual

Installing Dell OpenManage Software on Citrix XenServer 99
If the XenServer image is upgraded to a newer XenServer update or release,
the Dell OpenManage Supplemental Pack must be reinstalled since the new
XenServer image is placed on a different partition from the original. In this
case, follow the same installation instructions as before. However, any Dell
OpenManage configuration settings saved on your server is lost.
For more information on using Dell OpenManage with Citrix XenServer Dell
Edition, see the Citrix XenServer Dell Edition Solution Guide at
support.dell.com/support/edocs/software/Citrix/.
NOTE: If you are connecting to a XenServer 6.0 managed node using server
administrator web server, use port 5986 in the format Hostname:Port Number, or IP
address:Port Number.
Post Installation Tasks
After the installation or upgrade of OpenManage:
1
Execute the post installation configuration scripts of Remote Enablement
feature:
$ cd /opt/dell/srvadmin/etc
$ ./autoconf_cim_component.sh -p 5986
2
Restart openwsman and sfcb services:
$ /etc/init.d/openwsmand restart
$ /etc/init.d/sfcb restart
3
Open the port 5986:
$ iptables -I RH-Firewall-1-INPUT -p
tcp --destination-port 5986 -j ACCEPT
4
Start the Server Administrator services:
$ sh srvadmin-services start