Installation manual

Installing Dell OpenManage Software on Citrix XenServer 97

Installing Dell OpenManage

Software on Citrix XenServer

The Dell OpenManage Server Administrator is installed on Citrix XenServer

using the Dell OpenManage Supplemental Pack. The OpenManage

Supplemental Pack for Citrix XenServer 6.0 can be installed in two ways:

• During the installation of XenServer

Start the installation of XenServer as usual and follow the instructions

on the screen.

One of the early questions during the installation process of XenServer

is if you want to install any Supplemental Packs; click

Yes

and

continue with the installation process.

After the base XenServer image is installed (5-10 minutes depending

on the speed of your system), you are prompted to insert your

Supplemental Pack CD. Eject the XenServer installation CD from the

optical drive, insert the Dell OpenManage Supplemental Pack CD

and click

. The message '

OpenManage Supplemental Pack

was found

' is displayed. To confirm installation, click

Use

and click

NOTE: If you have more than one Supplemental Pack, (either the Linux

Supplemental Pack from Citrix or other third-party applications) you can install

them in any order, although it is recommended that you install the Dell

OpenManage Supplemental Pack last.

After completing the Dell OpenManage Supplemental Pack

installation (2-5 minutes, depending on the speed of your system),

you are prompted to install other Supplemental Packs. If you do not

want to install other supplemental packs, click

Skip

and press

<Enter>. The XenServer is installed successfully.

NOTE: When installing RPM packages, to avoid warnings concerning the

RPM–GPG key, import the key with a command similar to the following:

rpm --import<OM DVD mountpoint>/

SYSMGMT/srvadmin/linux/RPM-GPG-KEY