Installation manual

120 Using Microsoft Active Directory
Configuring Active Directory Using CLI on Systems Running Server Administrator
You can use the omconfig preferences dirservice command to configure the
Active Directory service. The
product oem.ini file is modified to reflect these
changes. If the adproductname is not present in the
product oem.ini file, a
default name is assigned.
The default value is
system name-software-product name , where system name
is the name of the system running Server Administrator, and
software-
product name
refers to the name of the software product defined in
omprv32.ini (that is,
computerName -omsa).
NOTE: This command is applicable only on Windows.
NOTE: Restart the Server Administrator service after you have configured Active
Directory.
Table 8-13 shows the valid parameters for the command.
Table 8-13. Active Directory Service Configuration Parameters
name=value pair Description
prodname=<text> Specifies the software product to which you want to apply
the Active Directory configuration changes. Prodname
refers to the name of the product defined in omprv32.ini.
For Server Administrator, it is omsa.
enable=<true | false> true: Enables Active Directory service authentication
support.
false: Disables Active Directory service authentication
support.
adprodname=<text> Specifies the name of the product as defined in the Active
Directory service. This name links the product with the
Active Directory privilege data for user authentication.